SIS. 01:
Support used in folded sheet upright of 127x4,8 mm up to 250x9,5 mm or in tubular upright of 60 mm to 114 mm, in order to fix 89 mm to 114 mm mountings or up to UPN 14 profiles.

SIS. 02:
Support used in tubular upright up to 73 mm for fixing horizontally rings or for fixing vertically up to UPN 14 beams or 114 mm mounting pipe.

SIS. 03:
Support used in folded sheet upright of 127x4,8 mm up to 250x9,5 mm or in tubular upright of 60 mm to 114 mm, in order to fix horizontally 76 mm tubular rings.

SIS. 04:
Support used in folded sheet upright of 127x4,8 mm up to 250x9,5 mm or in tubular upright of 60 mm to 114 mm, in order to fix 89 mm to 114 mm mountings or up to UPN 14 profiles at the apex of the structure.

SIS. 05:
Support used in folded sheet upright of 127x4,8 mm up to 250x9,5 mm or in tubular upright of 60 mm to 114 mm, in order to fix 89 mm to 114 mm mountings or up to UPN 14 profiles at the apex of the structure. Unlike SIS. 04 has slide, which allows, for example, by combining both models, the vertical mounting on a truncated cone tower through the regulation of the clamp in the eyelets. There are models with a 60º and 90º aperture angle depending on the upright.

SIS. 07:
Support for self supporting tower with combined laminated profile upright from L51x4,8 to L127x15,8, to set 89 mm to 114 mm mountings at the apex of the structure. Allows the vertical mounting on a truncated cone tower through the regulation of the clamp in the eyelets.

SIS. 08:
Support for self supporting tower with laminated profile upright from L51x4,8 to L127x15,8, to set 89 mm to 114 mm mountings at the apex of the structure. Allows the vertical mounting on a truncated cone tower through the regulation of the clamp in the eyelets.

Lateral Support for 590 mm dishes:
Support that is attached to two uprights, on one side of a mast type SI-108 SI-128 or SI-168 and allows mounting a set of 50 cm to 3 m length and 48 mm, 89 mm or 114 mm diameter.

Lateral Support for parables of 850 mm:
Support that is attached to two uprights, on one side of a mast type SI-3512 and SI-4512 and allows mounting a set of 50 cm to 3 m length and 48 mm, 89 mm or 114 mm diameter.

Universal support:
Support specifically designed not only to adapt to different types of mounting, but also different patterns of mast.