Steel guy-wires:
Formed with different diameters and formations of steel cables depends on each use. It is part of the complete assembly kit, considering three anchorages at a distance of 60% of the mast height.

Aramid fiber guy-lines:
Formed by Kevlar (see Representations section). These elements are not standard, but are used for specific purposes when radiofrequency isolation is a must.

Thimble:
End element for holding guy-wires. It is part of the complete assembly kit. Are replaced by links or links and sheave in large diameters.

Turnbuckle:
Element to fix the guy-wire to anchor and allows regulating the degree of tension of the guy-wires. It is part of the complete assembly kit.

Guy bracket:
Element to fix the guy-wire to the mast. It is part of the complete assembly kit.

Guy-wires Clamp:
Additional element to provide correct join of steel cable in accordance with established standards.

Anchor rod:
Metallic element for fixing the tensor and which is inserted in the anchorage concrete structure. It is part of the complete assembly kit.

Bolt kit:
Set including screw, nut, flat washers and/or grower as specific use. It is part of the complete assembly kit of legs, leg to T-base and T-base to concrete base.

T-Bases for support:
Pre-cast concrete structure with T form. The profiles used depends on type of mast. Used to work fast to model SI-168. Excluding the T bolt fixing to concrete if it is provided as an isolated article.

Anti-torsion system for different models:
Metallic structure which is mounted on the mast in place specifically calculated, and on which is installed another set of guy-wires to provide stability. Not a part of the complete assembly kit, but its necessity is established according to the conditions.

Concrete preformed Anchorage:
Concrete structures pre-shaped to mount without the need to make concrete in situ. Not a part of the complete assembly kit, but its feasibility is established for use depending on conditions.

Belt:
Metal structure with pins and thimble, surrounding the mast and used for linking guy-wires in models SI-6516 and onwards. Is fixed to the mast faces at heights corresponding to those established for the guy-wires. It is part of the complete kit for these models.